A family operation is a special operation. We know quality products and commitment to our customers is the foundation for our future.
We know our reputation as a family run company ships right along with every product we produce.
When your name and your children and grandchildren's future are shipping with your products, you get it right every time.
We are proud of the innovations of our poly fenders, toolboxes, mud flaps, Slick Disk, and bug deflectors.
We are proud of the people who make them. We are proud to be a family run business in the USA. Our pride, is your assurance, that you will get only our very best with every order we ship.
MAINTENANCE The Minimizer™ fender itself should never need maintenance other than the occasional wash using any all purpose cleaner. Paint is not necessary because the polyethylene material used to make the Minimizer™ fender is corrosion resistant. Make sure that all the bolts attaching the fender to the mounting hardware are snug and not overly tight. Occasionally check the bolts holding the mounting hardware to the frame to assure they are securely tightened. If you bend or break any of the mounting hardware replace them immediately. This will relieve any stress on the fender. If you have any questions about your Minimizer™ fenders please do no hesitate to call our customer service people at 800-248-3855. Again thank you for choosing the Minimizer™ poly fender. OUR FAMILY'S WARRANTY Now that the legal guys have had their say, here's what we say: We’re human, we know that sometimes, “THINGS” happen. With our extensive background in plastic materials and the trucking industry, we understand the physical properties of the materials we use and we know that our plastic just doesn't “break” or “crack” under normal use unless the unforeseeable happens. If so – we have probably done it ourselves, or have tested our material to the utmost extremes and have seen it before. Be sure to check out our videos at www.minimizer.com or www.youtube.com or ask a Minimizer sales rep. for one. We've engineered our fenders & brackets to last longer than the life of your truck. We’re a family company, we do care about the products we produce on a daily basis. So there is an inherent respect for you, our customer, who makes their living using the vehicles and equipment our products serve to protect. So don't tell us you were "driving along” when your bracket broke or bent back and your wheel is now rubbing the fender. We are drivers and were founded by a driver, too. We've been around the block a few times. If you dumped your truck into a monster pothole, dropped a trailer, got hit by a reckless vehicle operator or backed over your flap and pulled the fenders off we sympathize with you and will try to help you out, as we've done or seen all those things. We want you to keep running our products. So in the event of unlucky stuff happening, please refer to our Stuff Happens (SH) policy below. SH POLICY We will offer to replace the part in question or sell replacement parts at a significant discount to our customers who forget that our products are not at all times “invincible”. We extend this to original owners only. If you bought it at an authorized Minimizer dealer, please see them for details. We will require a digital photo of the damage or the original part back. We promise to make it right for you. We do not want an “Accident” to leave a bad taste in your mouth regarding Minimizer Products. Always remember we have been in the trucking industry for 25 years and have seen it all. Nothing is unexpected with us. WARRANTY AND LIMITATION OF REMEDIES 1. GENERAL CONDITIONS.
Spray Control Systems, Inc. (“SCSI”) provides the following Warranty and Limitation of Remedies for the products identified below.
SCSI will not be responsible for damages or breakage caused by alterations or installation of the product.
2. SPECIFIC PRODUCTS.
A. Standard Fender Products.
MERCHANDISE RETURN POLICY Spray Control Systems, Inc. wants you to be happy with any purchase that you make from us; therefore we offer only high quality merchandise that we feel is superior in materials and craftsmanship. If you are unhappy with your purchase feel free to contact us and we will be happy to make it right. We'd like to help you resolve a purchase problem as quickly and easily as possible provided you meet the terms and conditions listed below. Please note that NOT ALL items are covered by our RMA Policy. You may return your purchased products within 15 days of the invoice date. After 15 days, No merchandise can be returned unless defective or within the terms of the manufactures warranty. Anything returned without an RMA number on the outside of the package will be refused and sent back to the company. MERCHANDISE RETURN POLICY 1. All merchandise returned will be subject to a 20% restocking charge. All sales are subject to approval before return. Our knowledge of your intent to return the merchandise will insure that you receive proper credit. 2. Please provide the following information when calling or e-mailing for an RMA number: Customer Name, Contact Name, Zip Code (Billing), Sales Order Number, SCSI Part# and Quantity, along with the nature of the problem. 3. New merchandise will be accepted for credit only with prior approval by an SCSI Product Specialist. Your Product Specialist will issue a RETURNED MATERIAL AUTHORIZATION (RMA) number which must appear on all returned cartons and corresponding packing list's). Merchandise must be received within 30 days of issuance of the RMA number otherwise, credit will not be issued. No merchandise can be returned after 15 days unless defective or within the terms of the manufactures warranty. Please Note: No returns will be accepted if the manufacturer's RMA# sheet is missing or is not visible on any and all packages being returned. 4. All purchased merchandise must be returned in "BRAND NEW" condition, if materials are returned in a “Less Than Brand New” condition You will be notified by an SCSI representative. A refurbishing fee may be required to restore the merchandise to a marketable condition. The fee for refurbishing will be presented to you to accept or reject, at which time the merchandise will either be reworked or returned to you. This fee is in addition to any restocking or handling fee of at least 10% which may be levied. Credit for returned merchandise will be issued at the original purchase price minus any fees listed above. Only merchandise purchased within the past fifteen (15) days may be returned. Special order merchandise can not be returned at any time. 5. If the returned packages are missing any of the manufacturers supplied accessories or there is obvious damage or visible wear and tear to the merchandise, Spray Control Systems, Inc. reserves the right to refuse the return. 6. If you are trying to return/exchange an item that you've tried to install and the item has become damaged so that it is no longer in “BRAND NEW” condition, we will not be able to accept a return/exchange on that item. We can only allow returns/exchanges for new and unused parts that have not been installed and/or damaged. 7. All products are sold with their respective manufacturer's warranties. Please note that warranty periods and services vary depending on the product. 8. The purchaser will be responsible for return shipping costs. When returning products, we strongly recommend the use of a carrier that can track packages. Spray Control Systems, Inc. does not reimburse any customers return shipping cost. Claims for delay, loss, or damage should be made against the freight carrier. 9. Spray Control Systems, Inc. will not accept any returns shipped freight COD or UPS COD. If you ship items to us, please insure the items to their full value and request proof of delivery. Items must be in a reasonable return package, to insure they are returned in a “BRAND NEW” condition. If not, damage may occur in the shipping process, which SCSI will not be held responsible, and may cause the product to be returned in a “NOT LIKE BRAND NEW” condition. 10. Returned goods privileges will apply only to customers currently purchasing Minimizer™ Products and whose accounts are in current condition. No cash settlement will be made, if you are inquiring about RMA # for merchandise that was purchased through one of Spray Control Systems, Inc. qualified dealers, and not directly from SCSI, please contact your point of purchase retailer, and notify them. They will be responsible for the return of merchandise. 11. The customer shall not deduct amounts for returned merchandise from payments to Spray Control Systems, Inc. When approved returned merchandise has been received, inspected, and processed, Spray Control Systems, Inc. will promptly issue credit to the customer account or Customers Credit Card. No deduction shall be made until the credit memo has been issued. 12. Customers returning merchandise which is not approved for credit or replacement will be notified in writing by a Spray Control Systems, Inc. Representative. Failure by the customer to respond within ten (10) days to such notice will be just cause for Spray Control Systems, Inc. to scrap or return the merchandise, freight collect, back to the customer. 13. Customers needing additional assistance regarding the Merchandise Return Policy should contact Spray Control Systems, Inc. and ask to speak to a representative. REQUESTING AN RMA# You may choose to use our RMA form for requesting a product return online through our web site's RMA form:
Spray Control Systems, Inc. 500 Minimizer Way SE Blooming Prairie, MN 55917 |
